Book a service
About this product

Description

The Silensys SIL 4519 Z outdoor condensing unit is factory-ready and built for outdoor conditions, which shortens installation time. It serves high-temperature refrigeration (HBP −15…+10 °C) with R-404a or R-507 and runs on a single-phase 220–240 V / 50 Hz supply.

It comes with a receiver, sight glass, liquid-line filter drier, crankcase heater, HBP/LBP dual pressure switch, fan-speed controller and contactor. The electrical parts are pre-wired to the internal control panel; the housing locks, a main switch is fitted and brackets allow vertical or horizontal mounting.

A dual pressure switch with manual reset and a receiver with safety relief valve are available as options. To EN13215 (20 °C superheat, 3 K subcooling) the unit gives 4912 W of refrigerating capacity and draws 2174 W. Airflow is 3500 m³/h; the receiver holds 2.35 l.

It draws 10.0 A in operation and 12.6 A at most. Sound power 69 dBA; noise level 38 dBA at 10 m and 44 dBA at 5 m. Pipe connections are brazed, 5/8″ (16 mm) on the suction line and 3/8″ (10 mm) on the liquid line.

If you would rather not fit it yourself, our own service team can do the job as part of cold room repair.

Technical data

Specifications

Type
Outdoor condensing unit
Manufacturer
Tecumseh Europe
Model name
SIL 4519 Z
Suction pressure
High suction pressure HBP -15°C..+10°C
Refrigerant
R-404a and R-507
Power consumption; W
2174
Refrigerating capacity to EN13215; W
4912
Refrigerating capacity note
Standard EN13215: refrigeration capacity is stated at suction gas superheat 20°C and liquid refrigerant subcooling 3K. Capacity is stated for a 1-phase unit. Data may differ for a 3-phase unit.
Sound power level; dBA
69
Noise level at 10 m / 5 m; dBA
38 / 44
Noise level note
Noise level is stated at maximum fan speed in free-field outdoor conditions according to EN13215: evaporating temperature +5°C, suction gas superheat 20°C, liquid refrigerant subcooling 3K and ambient air temperature +32°C. Tecumseh Europe uses the EN ISO 3743-1 noise measurement standard to bring published noise data as close as possible to on-site conditions.
Airflow; m³/h
3500
Refrigerant receiver capacity; L
2,35
Rated running current; A / maximum running current; A
10,0 / 12,6
Suction line diameter
5/8" (16 mm)
Liquid refrigerant line diameter
3/8" (10 mm)
Pipe connections
Brazed connections
External dimensions: length / width / height; mm
-
Gross and net weight; kg
-
Standard equipment
Refrigerant receiver, liquid refrigerant sight glass, liquid-line filter drier, crankcase heater, HBP/LBP dual pressure switch, fan-speed controller and compressor contactor. Internal electrical components pre-wired to the control panel. Lockable housing, main switch and mounting brackets for vertical or horizontal installation. Fan-speed control, aerodynamically shaped fan blades and sound insulation in the compressor compartment help reduce noise while supporting airflow.
Optional accessories
HBP / LBP dual pressure switch with manual reset; refrigerant receiver with a safety relief valve.
Voltage
1-220V/240V-50Hz
Warranty
12 months
Similar products

See also

Buying information

Delivery, warranty and ordering

SIL 4519 Z

Request a quote or advice

We can confirm price and availability and help you choose a suitable model.

All products